Drill Press Craftsman 20in woodshop

From Pumping Station One
Jump to navigation Jump to search


Drill Press Craftsman 20in woodshop
Craftsman20Drill.jpg
Owner/Loaner PS:One
Make/Model 137 229200
Usability yes
Contact Eric Beauchamp
Where Wood Shop
Authorization Needed yes
Hackable no
Estimated Value $500
Host Area Wood Shop


Drill Press Craftsman 20in woodshop Area: Wood Shop https://ps1.mywikis.wiki/wiki/Drill_Press_Craftsman_20in_woodshop




The Craftsman 20" drill press is the primary drill press in the wood shop. Authorization is included in the general wood shop authorization. For upcoming authorizations, see the calendar.

Safety

Eye protection of course. You only get the one set, take care of them. Drills can grab and spin whatever you're drilling into. Clamp or otherwise support your work.

The user manual is available here.

Maintenance

Per the user manual, the drill should be periodically cleaned of dust, the table wiped with wax to prevent rust, and (if needed) the quill lubricated with a dry lubricant like silicone or graphite. Users should perform this maintenance as the drill is used, and PS1 should inspect the drill monthly.

Maintenance history

  • July 10, 2017. Drill press motor is not fully connected. Belt may be rubbing on the housing.
  • July 14, 2017. One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
  • July 18, 2017. This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.

Outside Resources

Drill Press Basics Solid video by Wood Magazine. Highly recommended.

Recommended speeds for the drill press You'll get much better results if you match the speed to the bit.

List of Currently Authorized Users

Authorization for this tool by authorized proctors only. Members not previously Authorized must take the CANVAS course at https://canvas.pumpingstationone.org/courses/40 |- |}