Delta Mortising Machine
Jump to navigation
Jump to search
Owner/Loaner | PS:One |
---|---|
Make/Model | 14-650 Type 2 |
Usability | yes |
Contact | Eric Beauchamp |
Where | Wood Shop hand tools bench |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $500 |
Host Area | Wood Shop |
List of Currently Authorized Users
Authorization for this tool by authorized proctors only.
Qualified Member | Trained By | Date |
---|---|---|
Eric Beauchamp | Danger committee | |
Ralph Brendler | Danger committee | |
Jacob Snyder | Ralph Brendler | 9/17/17 |
Kari Danek | Ralph Bredler | |
Jeremie Davis | Ralph Brendler | 1/27/18 |
Alex Tomala | Ralph Brendler | 1/27/18 |
Mike Jones | Ralph Brendler | 1/27/18 |
Fritz Sullivan | Ralph Brendler | 5/30/18 |
Elizabeth Reuter | Ralph Brendler | 5/30/18 |
Sam Paris | Ralph Brendler | 6/2/19 |
Bogdan Bistriceanu | Ralph Brendler | 6/2/19 |
Ryan Pierce | Ralph Brendler | 1/26/20 |
Notes
nov 1 2018 replaced table level adjustment handle with 6mm hex bolt. (shattered for months now. could not find replacement)
Oct 2020. Bought new set of chisels/augers. Replaced chuck key.
This video is quite good in principle. Uses a different model but features and use are VERY Similar. Woodworkers Journal SCM setup and use
Safety
user manual: File:Delta 14-650.pdf