Recurring Maintenance

General Area

• Put equipment labels on equipment that is missing an equipment label (make a new wiki page if necessary).
• Move items in the Wut Zone to Limbo
• Throw out / Recycle Limbo items.
• Vacuum the top of the dust collections pipes
• Empty the dust collector bins and clean the filter stack by connecting a vacuum to the cleanout port.
• Audit member shelves.
• Change filter in upstairs HVAC (every 30 days): HVAC#Filter.
• Oil the pumps in the boiler room (annually): HVAC#Pumps.
• Clean out vents for the heaters
• Change air conditioning filters

CNC Area

• Grease Shopbot rails
• Clean underneath and around Shopbot
• Remove ticketed materials from
  • under the Shopbot
  • under the Shapeoko
• Organize vinyl

Electronics Area

• Remove/recycle e-waste

Hot Metals Area

• Clean table with chop saw, sander, etc.
• Sweep floor, especially by floor-standing grinder and welders
• Clean outside of cabinets
• Replace water in barrel
• Ensure there are shop (blue) paper towels by the sink
• Wash cotton welding jackets

Cold Metals Area

• Lubricate the manual Bridgeport milling machine head.
• Doall bandsaw- oil Reeves drive shaft (SAE 10 in oil cup under the big metal cover).
• Grease Johnson bandsaw (2 zerks on pivot shaft).

Wood Shop Area

• Sweep

Tool Cage Area

• Put away tools

Kitchen Area

• Clean refrigerator